You are here: Home > GPS > Controller and Collector Accessories
Sort By:
Page of 1
     
   

The Claw Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole.

The clamping function is limited so over-tightening cannot occur.

These clamps are compatible with our existing Quick-Release cradles (#5198-Series Cradles) for most popular data controllers or you can pair it with The Claw (#5200-05X) Quick-Release Cradle for your collector/controller.

These clamps are designed to fit a pole diameter of 1.25 in (32 mm), however a 1-inch pole can be used with a SECO adapter (#D11145).

Number:

Features:

5200-150

Plain

5200-151

With 40-min Vial

5200-152

With 20-min Vial

5200-153

With 8-min Vial

5200-154

With Compass

5200-155

With Compass, 40-min Vial

The Claw Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole.

The clamping function is limited so over-tightening cannot occur.

These clamps are compatible with our existing Quick-Release cradles (#5198-Series Cradles) for most popular data controllers or you can pair it with The Claw (#5200-05X) Quick-Release Cradle for your collector/controller.

These clamps are designed to fit a pole diameter of 1.25 in (32 mm), however a 1-inch pole can be used with a SECO adapter (#D11145).

Number:

Features:

5200-150

Plain

5200-151

With 40-min Vial

5200-152

With 20-min Vial

5200-153

With 8-min Vial

5200-154

With Compass

5200-155

With Compass, 40-min Vial

The Claw Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole.

The clamping function is limited so over-tightening cannot occur.

These clamps are compatible with our existing Quick-Release cradles (#5198-Series Cradles) for most popular data controllers or you can pair it with The Claw (#5200-05X) Quick-Release Cradle for your collector/controller.

These clamps are designed to fit a pole diameter of 1.25 in (32 mm), however a 1-inch pole can be used with a SECO adapter (#D11145).

Number:

Features:

5200-150

Plain

5200-151

With 40-min Vial

5200-152

With 20-min Vial

5200-153

With 8-min Vial

5200-154

With Compass

5200-155

With Compass, 40-min Vial

The Claw Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole.

The clamping function is limited so over-tightening cannot occur.

These clamps are compatible with our existing Quick-Release cradles (#5198-Series Cradles) for most popular data controllers or you can pair it with The Claw (#5200-05X) Quick-Release Cradle for your collector/controller.

These clamps are designed to fit a pole diameter of 1.25 in (32 mm), however a 1-inch pole can be used with a SECO adapter (#D11145).

Number:

Features:

5200-150

Plain

5200-151

With 40-min Vial

5200-152

With 20-min Vial

5200-153

With 8-min Vial

5200-154

With Compass

5200-155

With Compass, 40-min Vial

The Claw Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole.

The clamping function is limited so over-tightening cannot occur.

These clamps are compatible with our existing Quick-Release cradles (#5198-Series Cradles) for most popular data controllers or you can pair it with The Claw (#5200-05X) Quick-Release Cradle for your collector/controller.

These clamps are designed to fit a pole diameter of 1.25 in (32 mm), however a 1-inch pole can be used with a SECO adapter (#D11145).

Number:

Features:

5200-150

Plain

5200-151

With 40-min Vial

5200-152

With 20-min Vial

5200-153

With 8-min Vial

5200-154

With Compass

5200-155

With Compass, 40-min Vial

The Claw Series is designed to prevent the user from over tightening the pole clamp screw and accidentally crushing or cracking the pole.

The clamping function is limited so over-tightening cannot occur.

These clamps are compatible with our existing Quick-Release cradles (#5198-Series Cradles) for most popular data controllers or you can pair it with The Claw (#5200-05X) Quick-Release Cradle for your collector/controller.

These clamps are designed to fit a pole diameter of 1.25 in (32 mm), however a 1-inch pole can be used with a SECO adapter (#D11145).

Number:

Features:

5200-150

Plain

5200-151

With 40-min Vial

5200-152

With 20-min Vial

5200-153

With 8-min Vial

5200-154

With Compass

5200-155

With Compass, 40-min Vial

The Claw Series pole clamps are designed so that the user cannot "over tighten" the clamp screw and crush or crack the pole.

The clamping function is limited so over-tightening cannot occur.

Use these clamps with Ball-and-Socket cradles (#5200-XX-050) and the Ball-and-Socket Link (#5200-201) to make a custom combo.

The clamps are designed to fit a pole diameter of 1.25 inch (32 mm).

Number:

Features:

5200-160

Plain with 1-inch Ball

5200-161

40-min Vial with 1-inch Ball

5200-162

20-min Vial with 1-inch Ball

5200-163

8-min Vial with 1-inch Ball

5200-164

Compass with 1-inch Ball

5200-165

Compass, 40-min Vial with 1-inch Ball

The Claw Series pole clamps are designed so that the user cannot "over tighten" the clamp screw and crush or crack the pole.

The clamping function is limited so over-tightening cannot occur.

Use these clamps with Ball-and-Socket cradles (#5200-XX-050) and the Ball-and-Socket Link (#5200-201) to make a custom combo.

The clamps are designed to fit a pole diameter of 1.25 inch (32 mm).

Number:

Features:

5200-160

Plain with 1-inch Ball

5200-161

40-min Vial with 1-inch Ball

5200-162

20-min Vial with 1-inch Ball

5200-163

8-min Vial with 1-inch Ball

5200-164

Compass with 1-inch Ball

5200-165

Compass, 40-min Vial with 1-inch Ball

The Claw Series pole clamps are designed so that the user cannot "over tighten" the clamp screw and crush or crack the pole.

The clamping function is limited so over-tightening cannot occur.

Use these clamps with Ball-and-Socket cradles (#5200-XX-050) and the Ball-and-Socket Link (#5200-201) to make a custom combo.

The clamps are designed to fit a pole diameter of 1.25 inch (32 mm).

Number:

Features:

5200-160

Plain with 1-inch Ball

5200-161

40-min Vial with 1-inch Ball

5200-162

20-min Vial with 1-inch Ball

5200-163

8-min Vial with 1-inch Ball

5200-164

Compass with 1-inch Ball

5200-165

Compass, 40-min Vial with 1-inch Ball

The Claw Series pole clamps are designed so that the user cannot "over tighten" the clamp screw and crush or crack the pole.

The clamping function is limited so over-tightening cannot occur.

Use these clamps with Ball-and-Socket cradles (#5200-XX-050) and the Ball-and-Socket Link (#5200-201) to make a custom combo.

The clamps are designed to fit a pole diameter of 1.25 inch (32 mm).

Number:

Features:

5200-160

Plain with 1-inch Ball

5200-161

40-min Vial with 1-inch Ball

5200-162

20-min Vial with 1-inch Ball

5200-163

8-min Vial with 1-inch Ball

5200-164

Compass with 1-inch Ball

5200-165

Compass, 40-min Vial with 1-inch Ball

Ball-and-Socket Link 1"
List Price $19.95

The Claw Series pole clamps are designed so that the user cannot "over tighten" the clamp screw and crush or crack the pole.

The clamping function is limited so over-tightening cannot occur.

Use these clamps with Ball-and-Socket cradles (#5200-XX-050) and the Ball-and-Socket Link (#5200-201) to make a custom combo.

The clamps are designed to fit a pole diameter of 1.25 inch (32 mm).

Number:

Features:

5200-160

Plain with 1-inch Ball

5200-161

40-min Vial with 1-inch Ball

5200-162

20-min Vial with 1-inch Ball

5200-163

8-min Vial with 1-inch Ball

5200-164

Compass with 1-inch Ball

5200-165

Compass, 40-min Vial with 1-inch Ball

The Claw Series pole clamps are designed so that the user cannot "over tighten" the clamp screw and crush or crack the pole.

The clamping function is limited so over-tightening cannot occur.

Use these clamps with Ball-and-Socket cradles (#5200-XX-050) and the Ball-and-Socket Link (#5200-201) to make a custom combo.

The clamps are designed to fit a pole diameter of 1.25 inch (32 mm).

Number:

Features:

5200-160

Plain with 1-inch Ball

5200-161

40-min Vial with 1-inch Ball

5200-162

20-min Vial with 1-inch Ball

5200-163

8-min Vial with 1-inch Ball

5200-164

Compass with 1-inch Ball

5200-165

Compass, 40-min Vial with 1-inch Ball

 

Here's the next generation of quality SECO all-metal collector/controller cradles and clamps. The streamline design of The Clawâ„¢ cradles fit the body of a collector/controller snugly with easy, comfortable locking on the bottom of the cradle. The same is true for the pole clamp! The new design utilizes an "anti-crush" feature that locks up the cradle and clamp when tight, but is limited the risk of accidentally damaging the controller and pole is greatly reduced. These new cradles and clamps are constructed of corrosion-resistant anodized aluminum and the stainless steel clamp screws feature non-jamming coarse threads for easy open and close use.

The ball-and-socket link (#5200-201) allows an almost unlimited range of personalized tilt adjustment.

Models listed include cradle, ball-and-socket link and a 1.25-inch pole clamp.

Number:

Designed For:







http://surveying.com/simg_05/spacer.gif

5200-00

TSC2â„¢, Rangerâ„¢ 300X and 500X







http://surveying.com/simg_05/spacer.gif

5200-02

Allegro, Jett®•ce, Explorer, Tracker, FC-2200







http://surveying.com/simg_05/spacer.gif

5200-03

Reconâ„¢







http://surveying.com/simg_05/spacer.gif

5200-04

FC-100, Mobile Mapper CE and CX







http://surveying.com/simg_05/spacer.gif

5200-05

FC-1000, FC-2000







http://surveying.com/simg_05/spacer.gif

5200-06

GMS-2, GMS-2 Pro







http://surveying.com/simg_05/spacer.gif

5200-07

Archer, Leica DX10, Carlson Mini, Javad Victor







http://surveying.com/simg_05/spacer.gif

5200-08

FC-120, FC-200, QR







http://surveying.com/simg_05/spacer.gif

5200-09

Nomadâ„¢ 800 Series







http://surveying.com/simg_05/spacer.gif

5200-10

GeoCE,â„¢ XH,â„¢ XT,â„¢ XMâ„¢







http://surveying.com/simg_05/spacer.gif

5200-11

Workabout Pro







http://surveying.com/simg_05/spacer.gif

5200-12

Carlson Surveyor and Surveyor+







http://surveying.com/simg_05/spacer.gif

5200-13

FC-2500







The streamlined design of The Claw cradles fit the body of a collector/controller snugly with simple, comfortable locking on the bottom of the cradle. The new design utilizes an "anti-crush" feature that locks up the cradle when tight, but is limited the risk of accidentally damaging the controller or collector is greatly reduced. The cradles are constructed of corrosion-resistant anodized aluminum and their stainless steel clamp screws feature non-jamming coarse threads for easy open and close use.

Use with a Ball-and-Socket pole clamp of your choice (#5200-16X) and Ball-and-Socket Link (#5200-201) to create a custom unit for your pole.

Number:

Designed For:







http://surveying.com/simg_05/spacer.gif

5200-00-050

TSC2, Ranger 300X and 500X







http://surveying.com/simg_05/spacer.gif

5200-02-050

Allegro MX and CX, Jett®•ce, Explorer, Tracker, FC-2200







http://surveying.com/simg_05/spacer.gif

5200-03-050

Recon®







http://surveying.com/simg_05/spacer.gif

5200-06-050

GMS-2, GMS-2 Pro







http://surveying.com/simg_05/spacer.gif

5200-07-050

Archer, Leica DX10, Carlson Mini, Javad Victor







http://surveying.com/simg_05/spacer.gif

5200-08-050

FC-120, FC-200, QR







http://surveying.com/simg_05/spacer.gif

5200-09-050

Nomad 800 Series







http://surveying.com/simg_05/spacer.gif

5200-10-050

GeoCE, XH, XT XM







http://surveying.com/simg_05/spacer.gif

5200-11-050

Workabout Pro







http://surveying.com/simg_05/spacer.gif

5200-12-050

Carlson Surveyor and Surveyor+







http://surveying.com/simg_05/spacer.gif

5200-13-050

FC-2500







http://surveying.com/simg_05/spacer.gif

5200-04-050

FC-100, Mobile Mapper CE and CX







Here's the next generation of high-quality SECO all-metal collector/controller cradles. The streamlined design of these new cradles fit the body of a collector/controller snugly with simple, comfortable locking on the bottom of the cradle. The new design utilizes an "anti-crush" feature that locks up the cradle when tight, but is limited — the risk of damaging controller is greatly reduced. These cradles are constructed of corrosion-resistant anodized aluminum and the stainless steel clamp screws feature non-jamming coarse threads for easy open and close use.

Part Numbers: 5200-050, 5200-052, 5200-053, 5200-054, 5200-055, 5200-056, 5200-057, 5200-058, 5200-059, 5200-060, 5200-061
Use with pole clamp of your choice: 5200-150, 5200-151, 5200-152,5200-153, 5200-154, 5200-155 or 5198-052, 5198-054, 5198-055, 5198-059, 5198-152.

Cradle Part No:
Designed For:






5200-050
TSC2™, Ranger™ 300X and 500X






5200-052
Allegro MX and CX, Jett®•ce, Explorer, Tracker, FC-2200






5200-053 Recon®





5200-054
FC-100, Mobile Mapper CE and CX






5200-056
GMS-2, GMS-2 Pro






5200-057 Archer, Leica DX10, Carlson Mini, Javad Victor





5200-058
FC-120, FC-200, QR






5200-059 Nomad™ 800 Series





5200-060 GeoCE,™ XH,™ XT,™ XM™





5200-061 Workabout Pro





5200-062
Carlson Surveyor, Surveyor+






5200-063 FC-2500





5200-064
Geo 6000






5200-065
TSC3™ / Ranger3™

53701-00-HH
Trimble TSC2 Accessory - Rechargeable Battery PowerBoot Module