You are here: Home > TRIPODS / PRISM
Sort By:
Page of 2
Product Code: 5301-30-ORG Product Code: 5311-20-ORG Product Code: 5301-30-BLK
5302-10-BLK
Product Code: 5321-17-ORG Product Code: 5302-10-BLK Crain's revolutionary Tri-Max tripod, stands alone in meeting today's demanding stability requirements.
Fixed Tribrach Adapter
List Price $43.95
Sale Price: $34.95
You save $9.00!
Rotating Tribrach Adapter
List Price $51.95
Sale Price: $40.95
You save $11.00!
Horizontal Base
List Price $248.95
Sale Price: $236.95
You save $12.00!
Use this adapter for mounting retro prisms and tripod mounted target systems. It fits all 'wild-type' tribrachs with 5/8 x 11 mounting stud.

Weighs 0.5 lb (0.23 kg)
   
Incite Universal Tilting Prism Assembly
List Price $205.95
Sale Price: $174.95
You save $31.00!
Rotating Tribrach Adapter
List Price $61.95
Sale Price: $49.95
You save $12.00!
Prism H.T. Adapter
List Price $92.95
Sale Price: $86.95
You save $6.00!
  This adapter adapts retro prisms to 'wild-type' tribrachs and has a removable Zeiss plug and locking screw.

Weighs 1.75 lb (0.8 kg)
 
GPS Network Antenna Mast Adapter
List Price $129.95
Sale Price: $120.95
You save $9.00!
Masonry Mount Adapter
List Price $92.95
Sale Price: $86.95
You save $6.00!
Wild Prism Adapter
List Price $22.95
Sale Price: $20.95
You save $2.00!
Use the adapter for network GPS antenna mounts.

It's easy to install, it attaches to standard 2-inch threaded pipe used as the 'mast'.
 
The brass rotating adapter is removable and locks in the azimuth direction.
 
The body is made of anodized aluminum.
 
Weighs 2.0 lb (0.91 kg)
Use this adapter for network GPS antenna mounts.

It's easy to install, just drill three, 5/8-inch holes and fill with epoxy.

The brass rotating adapter is removable and locks in the azimuth direction.

The body is made of anodized aluminum with stainless steel 3/8 x 2-1/2-inch bolts.

Weighs 1.4 lb (0.61 kg)
 
Laser Tribrach
List Price $205.95
Sale Price: $164.95
You save $41.00!
European-Style Tribrach (without Optical Plummet)
List Price $191.95
Sale Price: $155.95
You save $36.00!
Traverse Tribrach Adapter
List Price $231.95
Sale Price: $182.95
You save $49.00!
     
Topo Shoe, Prism Pole
List Price $12.95
Topo Shoe, Wide Base
List Price $24.95
This steel body replacement point fits prism poles with 5/8 x 11 male threads on the bottom of the pole.

Weighs 0.3 lb (0.14 kg)
   
Topo Shoe & Point Combo
List Price $49.95
This new combo allows easy conversions from "control" to "topo" surveys. The quick-release pin and matched drill holes are the key!

Aluminum point weighs 0.15 lb (0.07 kg)
 
Aluminum topo shoe weighs 0.20 lb (0.09 kg)
   
Titanium Prism Pole Point
List Price $39.95
Offset Pole Holder Kit
List Price $94.95
    This adjustable offset bar can be used with total stations and prism poles to help get accurate elevation measurements in hard-to-reach places.

It can be used with any standard survey pole; simply unscrew the pole point, attach it to the brass male 5/8 x 11, then attach the pole to the female 5/8 x 11.
 
It has an adjustable centerline, 1.60 ft (48.76 cm) to 1.00 ft (30.48 cm) in 0.20 ft (6.09 cm) increments.
 
The offset bar is ideal to measure sewer inverts down manholes or odd surfaces on bridges and construction sites.
 
It is constructed of anodized 1/2-inch thick aluminum.
 
Features include: brass male 5/8 x 11 threaded post and a stainless steel 5/8 x 11 Heli-Coil®
 
Weighs 1.15 lb (0.52 kg)
  SECO now makes Gardner Engineering's Rod Rest (U.S. Patent pending).

The Rod Rest is a self-retracting 'kickstand' for survey rods.
 
It attaches quickly with one thumbscrew and is activated by simply pushing down a few inches on the handle.
 
The legs self-retract when the rod is lifted.
 
The Rod Rest is made of anodized durable-machined aluminum that won't rust or fatigue and has a stainless steel clamp screw.
 
It holds the rod at a 20 degree zenith angle.
 
This Rod Rest is for 1-1/4-inch diameter poles. Order the #5214-02 for 1-inch and 25-mm diameter poles.
 
It is lightweight, only 1.55 lb (0.70 kg)
SECO now makes Gardner Engineering's Rod Rest (U.S. Patent pending).

The Rod Rest is a self-retracting 'kickstand' for survey rods.
 
It attaches quickly with one thumbscrew and is activated by simply pushing down a few inches on the handle.
 
The legs self-retract when the rod is lifted.
 
The Rod Rest is made of anodized durable-machined aluminum that won't rust or fatigue and has a stainless steel clamp screw.
 
It holds the rod at a 20 degree zenith angle.
 
The is for 1-inch diameter poles. Order #5214-01 for 1-1/4 inch pole.
 
It is lightweight, only 1.55 lb (0.70 kg)