You are here: Home > TRIPODS / PRISM > Prism Poles
Sort By:
Page of 1
Incite Universal Tilting Prism Assembly
List Price $205.95
Sale Price: $174.95
You save $31.00!
Prism H.T. Adapter
List Price $92.95
Sale Price: $86.95
You save $6.00!
Offset Pole Holder Kit
List Price $94.95
     
This adjustable offset bar can be used with total stations and prism poles to help get accurate elevation measurements in hard-to-reach places.

It can be used with any standard survey pole; simply unscrew the pole point, attach it to the brass male 5/8 x 11, then attach the pole to the female 5/8 x 11.
 
It has an adjustable centerline, 1.60 ft (48.76 cm) to 1.00 ft (30.48 cm) in 0.20 ft (6.09 cm) increments.
 
The offset bar is ideal to measure sewer inverts down manholes or odd surfaces on bridges and construction sites.
 
It is constructed of anodized 1/2-inch thick aluminum.
 
Features include: brass male 5/8 x 11 threaded post and a stainless steel 5/8 x 11 Heli-Coil®
 
Weighs 1.15 lb (0.52 kg)
  SECO now makes Gardner Engineering's Rod Rest (U.S. Patent pending).

The Rod Rest is a self-retracting 'kickstand' for survey rods.
 
It attaches quickly with one thumbscrew and is activated by simply pushing down a few inches on the handle.
 
The legs self-retract when the rod is lifted.
 
The Rod Rest is made of anodized durable-machined aluminum that won't rust or fatigue and has a stainless steel clamp screw.
 
It holds the rod at a 20 degree zenith angle.
 
This Rod Rest is for 1-1/4-inch diameter poles. Order the #5214-02 for 1-inch and 25-mm diameter poles.
 
It is lightweight, only 1.55 lb (0.70 kg)
SECO now makes Gardner Engineering's Rod Rest (U.S. Patent pending).

The Rod Rest is a self-retracting 'kickstand' for survey rods.
 
It attaches quickly with one thumbscrew and is activated by simply pushing down a few inches on the handle.
 
The legs self-retract when the rod is lifted.
 
The Rod Rest is made of anodized durable-machined aluminum that won't rust or fatigue and has a stainless steel clamp screw.
 
It holds the rod at a 20 degree zenith angle.
 
The is for 1-inch diameter poles. Order #5214-01 for 1-1/4 inch pole.
 
It is lightweight, only 1.55 lb (0.70 kg)
SECO Bipods are the industry standard! We're proud to introduce the next generation bipod. The Quick-Release™ It's the fastest bipod on the market, bar none.

'Direct Drive' Quick-Release handles put the power and action right where you need it.
 
Quick set up: Use the Quick-Release handles to drive the leg points into the ground, and to level the circular vial on your pole.

Quick break down: Grab and squeeze both handles, collapse the legs and lift the pole to move to your next location. Simple.

It features a simple but positive mechanical design with easy to adjust locking tension.

Open clamp head with stainless steel clamp screw.

It fits 1-, 1.25- and 1.50-inch diameter poles.

Weighs  4.1 lbs